This space is available for third party applications Identifies a set of secret information that can be used by installed applications that have the rights to use it. The security area contains passwords and certificates, required by applications. Services are available only when logged as admin. Optional domains that will be used in concatenation with the provided urls Generally provided from the DHCP servers, but can be modified in edit mode If the DHCP server is not found, the avahi-autoip service is used to set an IP address in the range .x. Network parameters of the available interfacesīy default, the network interface is set with DHCP turned on to retrieve network parameters from the DHCP server. Available parameter in edit mode: Parameter When automatic update is not enabled the device will share the local RTC clock time. When enabled the device will accepts NTP requests from outside. The process is designed to operate in a changeable mode between 8 sec and 36 hr. The process is designed to provide a sufficient update rate to maximize accuracy while minimizing network overhead. The poll process sends NTP packets at intervals determined by the clock discipline algorithm. The NTP Client of the HMI Device is a complete implementation of the Network Time Protocol (NTP) version 4, but also retains compatibility with version 3, as defined by RFC-1305, and version 1 and 2, as defined by RFC-1059 and RFC-1119, respectively. The log files manager cyclically fill 3 files of 4Mb Date & Timeĭate and Time can set manually only when the Automatic Update is disabled.Įnable to keep date and time synchronized from a remote server Use save button to export a copy of the log files. Set the persistent log option if you want maintain the log files saved after a power reset. System Parameterĭevice status (Free RAM, Up time, CPU Load) After selecting the Country Code, the corresponding channels allocation and setting and for power level will be automatic. Selecting a country that does not match the country in which the device is operated may be punishable by law. The country settings are required for operation complying with the approvals. Language for the system settings interfaceĬountry Code is required for the WLAN Regulatory Domain and the device will not use the WiFi until this parameter will not have been set.Country Code (only needed on 5G devices).Set the below parameters to adapt the device to your country. The edit button is available only inside the dialogs that contains modifiable parameters. To change system settings values, enter in edit mode by click the edit button on the right top. Select "System Setting" from the HMI Default Mode screen Wait for 5 more seconds (without touching the screen) to enter Default Mode Wait for 5 seconds (without touching the screen) to enter System Settings sub menu When “tap-tap detected” message appears on the top of the screen. Tap-tap consists in a sequence of several touch activations by simple means of the finger tapping the touch screen performed during the power-up phase and started immediately after the HMI is powered on. When Runtime is installed the System Settings is accessible selecting “Show System Settings” option of Context Menu,Įnter System Settings via tap-tap procedure When Runtime is not installed, the System Settings is accessible from the Runtime Loader screen, WARNING: We discourage usage of CBC cyber suites in the context of SS元 or TLSv1.0 connections since potentially affected by some vulnerabilities. Please, click on advanced options and choice to proceeding.īrowse through the options available in the menu on the left: the active item is highlighted and related information is displayed on the right.ĭefault security protocols proposed by the HTTPS server in the Linux HMI device are: Since the certificate is not signed from a Certificate Authority you will get a warning message. When the connection is established, the HMI device send a certificate to use for the encryption. Note the remote access use encrypted https protocol on port 443. To access System Settings using a Web browser, enter the IP address of the device, in the following format: WARNING: For security reasons, change the default passwords for both usernames (passwords can be modified from the “System Settings -> Authentication” command)Īccessing at the system settings from the HMI device do not require to enter a password until the default "admin" password is not changed. Generic username is “user” with default password “user” The user interface of System Settings is based on HTML pages and can be accessed both locally on the HMI device screen and remotely using a Web browser.Īdministrator username with full access right is "admin" with default password "admin".
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |